Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Fort Lauderdale Homeowners Choose Carrier Air Duct Cleaning
Kestrel Air Duct Fort Lauderdale provides independent Air Duct Cleaning services for Carrier equipment, plus evaporator coil cleaning and duct sealing, for homeowners across Fort Lauderdale. We’re not a Carrier dealer or authorized service provider, and we’ll never claim to be. What we are is a crew that works on Carrier equipment every week, from 20-year-old 38TKB split systems in Sailboat Bend ranch homes to Infinity 26 units in beachfront condos along Galt Ocean Mile. That daily exposure means we know exactly how Fort Lauderdale’s salt air and humidity get into Carrier ductwork, and we know how to get it out. If your Carrier system is short-cycling, musty, or pushing dust into the house, call (754) 354-9798 and Dale Whitmore or one of our techs will give you a straight answer and a written price before any work starts.
Why Trust Kestrel Air Duct Fort Lauderdale for Your Carrier Air Duct Cleaning?
Dale Whitmore grew up in Los Angeles and learned the fundamentals of HVAC maintenance through the vocational program at Los Angeles Trade-Technical College. He spent years in the field refining his approach to negative-air extraction, which is the method of sealing off your duct system and pulling contaminants out with a high-powered vacuum rather than just blowing them around your attic. He and his crew have been working across Fort Lauderdale for several years now, handling everything from older ranch homes near Sailboat Bend to high-rise condo towers along the beachfront. South Florida’s humidity turns a dusty duct into a mold-friendly environment faster than most homeowners expect, and Dale has learned to spot the early warning signs before they become a coil replacement. He keeps a clear collection chamber on the truck so you can see exactly what came out of your system before he packs up. As he puts it, if you can’t see what came out, you don’t really know what got done.
Every Carrier job runs under the Kingswell Guarantee. That means a written price before work begins, a defined arrival window, a clean job site, and a 365-Day Done Right Promise in writing. If the work falls short within the guarantee period, we return and make it right at no charge. Our technicians are background-checked, uniformed, and use Rotobrush rotary brush systems to dislodge debris at the duct wall, Nikro negative-pressure units to pull contaminants out, and Abatement Technologies HEPA filtration to keep loosened particles out of your living space during the cleaning. Calls are answered by a live person 24/7, not a voicemail queue.
Styles & brands we work with
Common Carrier Air Duct Cleaning Problems We Fix in Fort Lauderdale
Here’s what we actually see when we open up Carrier systems in Fort Lauderdale. These are the real failure modes, not a generic list of duct-cleaning talking points.
- Excess dust accumulation on the Infinity air purifier pre-filter. Carrier’s Infinity air purifier is a genuinely good piece of equipment, but its pre-filter becomes a dust magnet when a return duct has even a small leak. The leak pulls unfiltered attic air into the return path, and the purifier ends up doing the ductwork’s job. We find this constantly in Fort Lauderdale homes where the return duct runs through a hot, dusty attic. The fix is sealing the return duct, not just swapping the filter every month.
- Mold growth on evaporator coils of Comfort 14 units in high-humidity spaces. The Comfort 14 is Carrier’s entry-level split system, and in South Florida it’s often installed in a closet or crawlspace where ambient humidity runs high. When the coil stays wet between cycles, organic matter from the ducts settles on it and feeds mold. We clean the coil with the proper coil cleaner, but we also address the duct contamination that keeps re-inoculating it. Cleaning the coil without cleaning the ducts is a temporary fix in Fort Lauderdale.
- Reduced airflow from blower wheel buildup on Performance 17 air handlers. The Performance 17 air handler moves a lot of air when it’s clean, but the blower wheel vanes collect a fine layer of dust and grease over time. That buildup reduces airflow, which makes the system run longer and removes less humidity. On a Performance 17, a dirty blower wheel often feels like a refrigerant problem. It usually isn’t. We pull the blower assembly, clean the wheel properly, and airflow comes right back.
- Dryer vent lint blockage causing overheating in legacy 38TKB condenser units. The 38TKB is a workhorse condenser from Carrier’s 1990s and early 2000s lineup, and plenty of them are still running in Fort Lauderdale’s mid-century concrete-block homes. But here’s a connection homeowners rarely make: when the dedicated dryer vent is clogged with lint, the laundry room heat and moisture back up into the home, and the whole HVAC system works harder. Our dryer vent cleaning uses the same negative-pressure approach as our duct work, including a lint trap bypass so clogs are cleared from the vent wall rather than just pushed further down the line.
- Salt-air corrosion on galvanized duct joints in beachside neighborhoods. In older Fort Lauderdale neighborhoods like Harbor Beach and Lauderdale-by-the-Sea, we regularly find rusted-out duct joints and microbial growth within five years of installation. The salt spray and relentless humidity eat through galvanized steel faster than anyone expects. We identify rusted joints during our video inspection and seal them with mastic, which stops the leaks pulling in humid outdoor air.
Carrier Parts & Our Repair-vs-Replace Approach
We prefer OEM-grade Carrier filters and coil cleaners when they’re the right tool for the job. For filters, the OEM fit matters, especially on Infinity systems where the air purifier and filter housing are engineered to work together. For duct sealing, quality aftermarket mastic and flex duct are often just as good as anything with a brand label on it, and we’ll tell you that plainly. The honest answer is what you’ll get from Dale and the whole crew, every time.
For Carrier systems nearing 12 to 15 years old, we’ll tell you if duct sealing and cleaning beats a duct replacement. We won’t upsell you into tearing out ductwork that has another decade of life left. We also won’t pretend a duct replacement is optional when the ducts have rusted through, collapsed, or are too contaminated to clean. The decision starts with a video inspection so you can see the inside of your ducts with your own eyes. Call (754) 354-9798 for an evaluation, and you’ll get a written price before any work starts.
Our Carrier Service Process – Step by Step
Our process follows The Kingswell Way, a standing code of conduct on every visit. Here’s how a typical Carrier air duct cleaning job goes in Fort Lauderdale.
- 1
Diagnosis and video inspection. We walk the system, check the return and supply paths, and run a camera through the ducts. On a Carrier system, we’re looking specifically at the return duct integrity, the blower wheel condition, and the coil face. You’ll see the footage before we recommend anything.
- 2
Duct sealing and source repair. Before we clean, we fix what’s causing the contamination. If the return duct has pulled loose from the air handler or a joint has rusted open, we seal it with mastic. Cleaning ducts without sealing leaks is a waste of your money.
- 3
Negative-air extraction with brush agitation. We connect a Nikro negative-pressure unit to the system to create a vacuum, then use Rotobrush rotary brushes to dislodge debris from the duct walls. The vacuum pulls everything out as it comes loose. An Abatement Technologies HEPA filter keeps it out of your living space. This is the proper sequence, and it’s why the collection chamber shows you what was actually removed.
- 4
Coil and blower cleaning, then testing. We clean the evaporator coil and blower wheel if they’re contaminated, because the cleanest ducts in the world don’t matter if the air handler is still blowing through a moldy coil. Then we run the system and verify static pressure, airflow, and temperature drop before we pack up.
- 5
Documentation and your 365-Day Done Right Promise. You get a written report of what we did, the before-and-after readings, and your guarantee in writing. If something falls short within 365 days, we return and make it right. No charge, no argument, no fine print.
See the difference
Before
After
Before
After
Before
AfterCarrier Products We Service & Install in Fort Lauderdale
Our Fort Lauderdale crew works on Carrier systems daily, from older 38TKB splits in mid-century ranch homes to modern Infinity 26 units in waterfront condos, and we also handle Hollywood Carrier service calls. We service the full range of Carrier residential equipment, including Infinity 26, Performance 17, and Comfort 14 air handlers and condensers, along with legacy systems still running after two decades of South Florida humidity. Our work focuses on what’s attached to those systems: the ductwork, the coils, the filtration, and the airflow path. We stock OEM-grade Carrier filters and coil cleaners locally for fast turnaround, and we keep quality mastic and flex duct on the trucks for same-visit sealing work.
We Also Service These Brands
While Carrier systems make up a large share of our work in Fort Lauderdale, we’re not a single-brand shop. We service Lennox and Trane equipment with the same Kingswell Guarantee and the same written pricing commitment. The brand of the condenser doesn’t change how we treat your ducts or your home.
FAQs – Carrier Air Duct Cleaning Service in Fort Lauderdale
No. We are an independent Carrier service provider, not a Carrier dealer or authorized warranty center. We use OEM-grade Carrier parts and filters when they’re the right choice, but we don’t represent Carrier and we’ll never imply otherwise. What we represent is our own 365-Day Done Right Promise in writing.
For filters and coil cleaners, yes, we use OEM-grade Carrier products because the fit and specifications matter, especially on Infinity systems. For duct sealants and some duct components, we use quality aftermarket materials that perform just as well and cost less. We’ll tell you which is which and why, and the price is in writing before any work starts.
Yes, and in a good way. When the ducts are dirty, the Infinity air purifier’s pre-filter clogs faster and the purifier struggles to do its job. After a proper cleaning and duct sealing, the pre-filter stays cleaner longer and the purifier can focus on what it’s designed to capture. If you’re replacing pre-filters every few weeks, the problem is probably your return ducts, not the purifier.
In most cases, yes. The Performance 17 air handler has an access panel that lets us reach the coil for cleaning without pulling the whole unit. We use the right coil cleaner for the coil type, and we capture the runoff properly rather than letting it drain into your home’s condensate line. If the coil is heavily fouled or the cabinet configuration is unusual, we may need to do additional work, and you’ll know that before we start.
Almost always, yes. The musty smell is typically organic material, usually mold or mildew, sitting on the evaporator coil or inside the ductwork. On a Comfort 14 in Fort Lauderdale’s humidity, the coil stays wet between cycles, and dust from dirty ducts settles on it and feeds the growth. Cleaning the ducts without cleaning the coil won’t eliminate the smell, and cleaning the coil without cleaning the ducts invites it back within weeks. We do both.
That depends on what we find during the video inspection. A 38TKB that’s still running is a testament to Carrier’s build quality, but the ductwork around it is just as old and has been living in Fort Lauderdale’s salty air for two decades. If the ducts are intact and just contaminated, cleaning is worth it. If rust has eaten through the seams or the insulation is saturated, replacement may be the only honest answer. We’ll show you the footage and let you decide, with a written price either way. Call (754) 354-9798 for the inspection.
Most Fort Lauderdale Carrier service jobs for air duct cleaning run between $450 and $900 for a full system, depending on the size of the home, the number of systems, and how accessible the ductwork is. Coil cleaning and duct sealing are quoted separately after we see the system. You’ll get a written price before any work starts, not after. Call (754) 354-9798 for an exact quote, and our live answer team will set it up.
Salt air accelerates rust on galvanized steel ducts, especially at the joints where the protective zinc coating is thinnest. Once a joint rusts through, humid outdoor air gets pulled into the return path, which brings mold, reduces efficiency, and forces the coil to work harder. In beachside neighborhoods like Lauderdale-by-the-Sea, we’ve seen duct joints fail within five years of installation. The fix is replacing the rusted sections, sealing everything with mastic, and keeping the system clean going forward.
Book Your Carrier Service in Fort Lauderdale, FL
We work on Carrier duct systems across Fort Lauderdale, from Coral Ridge to Riverland to Sunrise Key, and we also provide Carrier Air Duct Cleaning in Davie, FL. Call (754) 354-9798 for a free estimate. You’ll speak with a live person, get a written price before any work begins, and have your 365-Day Done Right Promise in writing. No pressure, just the facts and the work done right.
Written by Dale Whitmore, Owner at Kestrel Air Duct Fort Lauderdale, serving Fort Lauderdale since 2004.