Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Honeywell Air Duct Cleaning in Fort Lauderdale: What to Know First
We provide independent Honeywell air duct cleaning throughout Fort Lauderdale, and most whole-home jobs are completed in a single visit lasting three to five hours. The honest price posture is this: most Fort Lauderdale homes run between $450 and $850 for a full system cleaning, depending on home size and how long it’s been since the ducts were last touched. As an independent Honeywell service provider, we’re not affiliated with or authorized by Honeywell, but we know their equipment cold and we back every job with a written price before work starts.
This page is for Fort Lauderdale homeowners who own a Honeywell system or Honeywell filtration products and want straight answers about cleaning the ductwork that carries their conditioned air. If you’ve got dust on the registers a week after dusting the house, or you can’t remember the last time the ducts were opened, call us at (754) 354-9798 and we’ll talk through what you’re seeing before we ever schedule a visit.
How Honeywell Products Fail – and How We Fix Them
Honeywell builds reliable equipment, but Fort Lauderdale’s heat and humidity find the weak spots in any system. Here’s what we see most often on Honeywell jobs across the city:
- Honeywell TrueCLEAN and media filter housings that pull air too hard for dirty ducts. When a high-efficiency filter like the TrueCLEAN is doing its job, it starves the return side if the ductwork is packed with dust. That puts strain on the blower and pulls more debris into the coil. We clean the full return path so the filter isn’t fighting a losing battle.
- Older Honeywell electrostatic air cleaners (the F300 series we still find in ranch homes near Sailboat Bend) that leave fine dust on everything. Those cells lose efficiency as they age, and the dust that used to stick to the plates ends up recirculating through the supply ducts instead. Cleaning the ducts addresses the symptom, but we’ll tell you plainly if the cells themselves are part of the problem.
- Flex duct runs connected to Honeywell zoning dampers that sag and collect debris at the low point. Honeywell’s TrueZONE dampers are solid, but the flex duct attached to them in many Fort Lauderdale attics is often undersized or poorly supported. Debris settles at the sag, and every zone change pushes a puff of it into the room. We clean these runs and flag the sag so you can decide whether it needs repair.
- Honeywell whole-house bypass humidifiers in Florida homes that never should have had one. It sounds strange, but we find bypass humidifiers installed by out-of-state builders who didn’t account for South Florida’s climate. A humidifier tapping into the ductwork is a mold invitation down here. We’ll clean the duct path and recommend capping the bypass if humidity in the duct is running high.
- Return-side dust loading on Honeywell systems with poorly sealed filter access doors. If the filter slot doesn’t seal, air gets pulled around the filter instead of through it. That unfiltered Fort Lauderdale air, carrying fine sand and pollen, coats the return ducts fast. We clean the return side thoroughly and point out the seal issue so you can get a tight-fitting door or gasket.
Styles & brands we work with
Our Honeywell Air Duct Cleaning Process
Every Honeywell job follows the same sequence, whether it’s a single return in a condo tower or a full supply-and-return system in a multi-story home:
- 1
We inspect the full system first. That means opening access points, looking at the filter, the blower cabinet, the supply runs, and the returns. If a video inspection is needed, we use a small camera and show you what we find on the spot.
- 2
We agree on a written price before any work begins. The quote includes the full scope and the price you’ll pay. No changes at the door, no surprises after we open a duct.
- 3
We seal off and apply negative-air extraction. That’s the method of sealing the system and pulling contaminants out with a high-powered vacuum rather than just blowing them around. The Nikro negative-pressure unit does the pulling.
- 4
Brush agitation breaks up what’s stuck to the duct walls. Our Rotobrush rotary brush systems dislodge debris at the duct wall itself, so the vacuum isn’t just skimming the loose stuff off the top. Abatement Technologies HEPA filtration keeps the loosened particles out of your living space while we work.
- 5
We clean every supply and return register and the boxes behind them. Plenums and register boots trap a surprising amount of dust, and they get the same attention as the rest of the run.
- 6
We show you what came out before we pack up. The collection chamber is clear, and you’ll see exactly what was in your ducts. Then we walk the site, make sure it’s cleaner than we found it, and hand you the written 365-Day Done Right Promise before we leave.
See the difference
Before
After
Before
After
Before
AfterWhat Honeywell Air Duct Cleaning Costs in Fort Lauderdale
Most Fort Lauderdale homes with Honeywell systems fall into these ranges, based on the work we’ve done across the city:
- Single-family home, one system, all supply and return ducts: $450 to $700
- Larger home or two-story with multiple returns and long runs: $650 to $850
- Condo or townhome with a single short duct run: $300 to $450
- Add-on video inspection before or after cleaning: $75 to $150, deducted if you book the cleaning
What moves the price is the number of registers, the total length of the duct runs, how accessible the ducts are, and how long it’s been since the last cleaning. We don’t do per-vent pricing, and we don’t bait you in with a lowball number and then inflate it on the driveway. The price we write down is the one you pay. Call (754) 354-9798 for an exact quote; estimates are free and there’s no obligation to book.
Why Fort Lauderdale Homeowners Call Kestrel Air Duct Fort Lauderdale for Honeywell Work
Most customers who call us have already been let down once or twice, and they’re tired of it. We answer the phone with a live person, every time, day or night. The written price you get before work starts is the price on the invoice when we’re done. The 365-Day Done Right Promise is not a slogan, it’s a written guarantee on every single job: if the work falls short within a year, we return and make it right at no charge. Dale Whitmore and our crew know Honeywell systems specifically, and we service Lennox, Trane, and Carrier as well, so if you have mixed equipment, one visit covers the whole house. Our techs are background-checked, uniformed, and operating under the Kingswell Way: say the price, show up in the window we gave, leave the place cleaner, put the guarantee in writing, come back if it fails.
FAQs
No. Air duct cleaning does not void a Honeywell equipment warranty, provided the cleaning is done properly and doesn’t involve modifying the equipment. We don’t cut into the cabinet, alter the blower, or replace any wiring during a standard duct cleaning. If a component like a zoning damper or filter housing needs attention beyond cleaning, we’ll tell you before we touch it so you can check your warranty coverage.
A standard single-family home with a Honeywell system takes three to five hours from arrival to final walkthrough. Larger homes with long flex runs or multiple zones can push past that. We give you a defined arrival window when you book, and we show up inside it. Call (754) 354-9798 and we’ll give you a realistic time estimate for your specific home.
You see it. Before we pack up the equipment, we show you the collection chamber, and if we ran a video inspection, we’ll show you the before and after side by side. If you can’t see what came out, you don’t really know what got done. That’s why we don’t rush that part of the job.
Fort Lauderdale’s humidity makes duct interiors sticky, and sticky ducts hold onto fine sand, pollen, and dust that would otherwise blow through. Add in a Honeywell high-efficiency filter that’s doing its job on the return side, and the dust that gets past the seal settles in the supply side and stays there. We see it every week, especially in older homes where the ductwork hasn’t been opened in a decade or more.
We clean the ductwork, not the electronic cells themselves. If you have an F300 or similar Honeywell electrostatic unit, we’ll tell you whether the cells look like they need professional servicing through an authorized Honeywell contractor. We don’t replace or rebuild those components, but we’ll make sure the ducts connected to them are clean so whatever the air cleaner does, it isn’t undone by dirty ducts downstream.
Written by Dale Whitmore, Owner, Kestrel Air Duct Fort Lauderdale at Kestrel Air Duct Fort Lauderdale, serving Fort Lauderdale and nearby areas.